Premium Shaving Accessories
Featured Wet Shaving Essentials
• Sturdy Stand is not top heavy
• This 5 Jar Stand Measures 112mm (4.4")" Wide x 121mm (4.8") Deep x 245mm (9.65") Tall
• Plastic Filaments MADE IN THE USA in TEXAS!
• Dishwasher Safe PETG Plastic, PLA is not dishwasher safe due to the heat
• High Quality, Tough and UV Resistant
• Razors Brushes and Blades Not Included
The Shave Soap Stand is Made In The USA and is Copyright 2026 - Chris M Spencer. CAD Designed and 3D printed by me. As with all 3D prints, some layer lines may show more than others.
Fits Fatboy or Gold Executive
• Integrated stand to hold razor upright
• Solid brass hinge pins for greater longevity
• Strong Magnetic Latch keeps the lid closed
• Comes with my Split Blade Bank to hold New and Used Blades, same color as case
• Holds any 27.2mm x 50mm or smaller blade bank
• It will also hold the cardboard blade tucks
• Plastic Filaments MADE IN THE USA in TEXAS!
• Dishwasher Safe PETG Plastic, PLA is not dishwasher safe due to the heat
• High Quality, Tough and UV Resistant
• Razor not included
Personalization Note: We specialize in custom text personalization (please note: corporate brand logos are not available). Any custom text (like names, initials, dates, or razor model descriptions) can be printed! We welcome text identifiers like "1962 Fatboy," provided the request doesn't use corporate graphic logos. To guarantee your custom text perfectly pops against all 17 of our color options, text is exclusively available in High-Contrast Black or High-Contrast White
The Safety Razor Case is Made In The USA and is Copyright 2025 - Chris M Spencer. CAD Designed and 3D printed by me. As with all 3D prints, some layer lines may show more than others.
My cases are guaranteed to fit your razor if you order the correct case. If something should not fit right, you may have a variation of a certain model or a bent razor. Just take a pic of the razor in the case with description of where it doesn't fit and I would adjust the design and send another no charge.
Chris M. Spencer is not an associate of the Gillette Company, and the content or viewpoint of this product is not endorsed by the Gillette Company. This is an aftermarket, 3D-printed travel case designed independently to be compatible with vintage Gillette adjustable razors.
• Has indents for dice to keep track of shaves
• Comes with 8 FREE Dice
• Regular Front Slot Stand Holds Razors with Handles Up To 104 mm (4.09 inches) Long and 15mm Handle Diameter with slots to pull out the front
• Holds Razors with head up to 46mm x 26.8mm
• Bottom tray to hold blades, tucks, spare base plates, etc
• This stand Measures 6.69" Wide, 4.4" Tall and 2" Deep
• Plastic Filaments MADE IN THE USA in TEXAS!
• Dishwasher Safe PETG Plastic, PLA is not dishwasher safe due to the heat
• High Quality, Tough and UV Resistant
• Plastic Filaments MADE IN THE USA in TEXAS!
• Dishwasher Safe PETG Plastic, PLA is not dishwasher safe due to the heat
â–ş High Quality, Tough and UV Resistant
â–ş Razors Brushes and Blades Not Included
The Double Edge Razor Blade Stand is Made In The USA and is Copyright 2026 - Chris M Spencer. CAD Designed and 3D printed by me. As with all 3D prints, some layer lines may show more than others.
Fits Slim or Gold Slim Aristocrat
• Integrated stand to hold razor upright
• Solid brass hinge pins for greater longevity
• Strong Magnetic Latch keeps the lid closed
• Comes with my Split Blade Bank to hold New and Used Blades, same color as case
• Holds any 27.2mm x 50mm or smaller blade bank
• It will also hold the cardboard blade tucks
• Plastic Filaments MADE IN THE USA in TEXAS!
• Dishwasher Safe PETG Plastic, PLA is not dishwasher safe due to the heat
• High Quality, Tough and UV Resistant
• Razor not included
Personalization Note: We specialize in custom text personalization (please note: corporate brand logos are not available). Any custom text (like names, initials, dates, or razor model descriptions) can be printed! We welcome text identifiers like "1962 Fatboy," provided the request doesn't use corporate graphic logos. To guarantee your custom text perfectly pops against all 17 of our color options, text is exclusively available in High-Contrast Black or High-Contrast White
The Safety Razor Case is Made In The USA and is Copyright 2025 - Chris M Spencer. CAD Designed and 3D printed by me. As with all 3D prints, some layer lines may show more than others.
My cases are guaranteed to fit your razor if you order the correct case. If something should not fit right, you may have a variation of a certain model or a bent razor. Just take a pic of the razor in the case with description of where it doesn't fit and I would adjust the design and send another no charge.
Chris M. Spencer is not an associate of the Gillette Company, and the content or viewpoint of this product is not endorsed by the Gillette Company. This is an aftermarket, 3D-printed travel case designed independently to be compatible with vintage Gillette adjustable razors.
This is an awesome stand to display your Shave Of The day!
• This stand fits 1 Shave Brush, 1 Razor, 1 Soap (up to 4") and 2 Blade Tucks
• Holds Brushes that will fit 22mm to 42mm slots (.86" to 1.65")
• Comes with 10 removeable and interchangeable plates to fit most all Shave Brushes
• Bottom tray to hold blades, tucks, spare base plates, etc
• This Stand Measures 8 5/8" Wide, 4 1/2" Tall and 3" Deep
• Plastic Filaments MADE IN THE USA in TEXAS!
• Dishwasher Safe PETG Plastic, PLA is not dishwasher safe due to the heat
• High Quality, Tough and UV Resistant
• Razors, Brushes, Soap, Used Blade Bank and Blades Not Included
Personalization Note: To guarantee your custom text perfectly pops against all 17 of our color options, text and logos are exclusively available in High-Contrast Black or High-Contrast White
The SOTD Stand is Made In The USA and is Copyright 2026 - Chris M Spencer. CAD Designed and 3D printed by me. As with all 3D prints, some layer lines may show more than others.
Universal Safety Razor Case will hold 90% of safety razors ever made, Vintage and Modern.
Maximum Handle Length from bottom of guard to end of handle - 89.4mm / 3.5"
Maximum Head Length, End Cap to End Cap - 45mm / 1.77"
Maximum Head With, Top to Bottom - 12mm / .47"
Maximum Handle Diameter - 14mm / .55"
• Integrated stand to hold razor upright
• Solid brass hinge pins for greater longevity
• Strong Magnetic Latch keeps the lid closed
• Comes with my Split Blade Bank to hold New and Used Blades, same color as case
• Holds any 27.2mm x 50mm or smaller blade bank
• It will also hold the cardboard blade tucks
• Plastic Filaments MADE IN THE USA in TEXAS!
• Dishwasher Safe PETG Plastic, PLA is not dishwasher safe due to the heat
• High Quality, Tough and UV Resistant
• Razor not included
Personalization Note: We specialize in custom text personalization (please note: corporate brand logos are not available). Any custom text (like names, initials, dates, or razor model descriptions) can be printed! We welcome text identifiers like "1962 Fatboy," provided the request doesn't use corporate graphic logos. To guarantee your custom text perfectly pops against all 17 of our color options, text is exclusively available in High-Contrast Black or High-Contrast White
This is an aftermarket, 3D-printed travel case designed independently to be compatible with Fatboy, Slim Adjustable, Super Adjustable 84, Bostonian, New Improved, Cavalier, Old Type, Tech, Fat Handle Tech, Super Speed 40's Style, Super Speed Flare Tip, Blue Tip, Black Tip, Red Dot Fatboy, Senator, Sheraton, Tuckaway, Single Ring, NEW Long Comb, NEW Short Comb, Aristocrat, Regent Tech, Ranger Tech, Goodwill, Milord, President, Diplomat, Executive, Knack, Black Handle Super Speed, Overlander, Christopher Bradley, Bison.
Razors Confirmed to NOT FIT:
Super Adjustable 109, Lady Starburst
The Universal safety Razor Case is Made In The USA and is Copyright 2025 - Chris M Spencer. CAD Designed and 3D printed by me. As with all 3D prints, some layer lines may show more than others.
My cases are guaranteed to fit your razor if you order the correct case. If something should not fit right, you may have a variation of a certain model or a bent razor. Just take a pic of the razor in the case with description of where it doesn't fit and I would adjust the design and send another no charge.
• The case comes with an Soap Dispenser Tube Compatible with Arko soap and one free Soap
• Comes with my Custom Shave Brush and Brush Tube
• You can also load scoops of your favorite soap in the Soap Tube
• Cap end has holes for air flow to keep brush and soap dry
•Cap is held in place by magnet latches
• Plastic Filaments MADE IN THE USA in TEXAS!
• Dishwasher Safe PETG Plastic, PLA is not dishwasher safe due to the heat
• High Quality, Tough and UV Resistant
Personalization Note: To guarantee your custom text perfectly pops against all 17 of our color options, text and logos are exclusively available in High-Contrast Black or High-Contrast White
Shave Brush:
• 34mm wide x 31.6mm tall base
• 22mm Tuxedo bulb shaped black synthetic knot with 50mm loft
• Great backbone with super soft white tips
• Handle is light weight and very comfortable in the fingertips
Arko Shave Stick with shave stick holder tube:
â–ş Softens your beard for a close and extra comfortable shave
â–ş Protects skin from shaving irritations
â–ş Leaves skin feeling clean and comfortable
â–ş Stick fits in custom holder tube
â–ş To Use: 1- Push soap up 1/4" to 1/2" out the top, press sides of tube to hold soap in place. 2- Wash face with hot water. 3- Apply hot water to face with hands, massaging in. 4- Wet the end of the soap stick with hot water and rub over face, repeat until face is lightly coated. 5- Rinse brush with hot water and lightly shake out excess. 6- Swirl brush over face vigorously to whip up a nice lather. 6- Add more water to the brush or soap to the face as needed to get a full lather. There are lots of instructional videos of using the Arko Shave Soap on Youtube.
Arko Soap Setup: Arko soap out of the box is rarely completely round. Take the soap and roll it on a counter with the palm of your hand until it is round enough to fit in the tube. Place the barbed disk in the bottom of the tube, insert the soap, and put the Plunger in the end of the tube. Press down on the plunger to seat the soap on the barbed disk and mold the soap to the form of the tube. Press up on disk from bottom and peel 1/4" to 1/2" of paper off soap and you are ready!
If the Arko Stick paper cover starts to deteriorate and stick, run tube under hot water to loosen and remove. Take off all original paper and cover with 1 layer of tin foil. This will help it to slide up and down alot easier and get rid of sticking.
The Shave Brush and Case is Made In The USA and is Copyright 2025 - Chris M Spencer. CAD Designed and 3D printed by me in Marble PETG Filament. As with all 3D prints, some layer lines may show more than others.
Fits Flare Tip, TV Special, Blue Tip, Black Handle, English Flare Rocket Super Speeds
• Integrated stand to hold razor upright
• Solid brass hinge pins for greater longevity
• Strong Magnetic Latch keeps the lid closed
• Comes with my Split Blade Bank to hold New and Used Blades, same color as case
• Holds any 27.2mm x 50mm or smaller blade bank
• It will also hold the cardboard blade tucks
• Plastic Filaments MADE IN THE USA in TEXAS!
• Dishwasher Safe PETG Plastic, PLA is not dishwasher safe due to the heat
• High Quality, Tough and UV Resistant
• Razor not included
Personalization Note: We specialize in custom text personalization (please note: corporate brand logos are not available). Any custom text (like names, initials, dates, or razor model descriptions) can be printed! We welcome text identifiers like "1962 Fatboy," provided the request doesn't use corporate graphic logos. To guarantee your custom text perfectly pops against all 17 of our color options, text is exclusively available in High-Contrast Black or High-Contrast White
The Safety Razor Case is Made In The USA and is Copyright 2025 - Chris M Spencer. CAD Designed and 3D printed by me. As with all 3D prints, some layer lines may show more than others.
My cases are guaranteed to fit your razor if you order the correct case. If something should not fit right, you may have a variation of a certain model or a bent razor. Just take a pic of the razor in the case with description of where it doesn't fit and I would adjust the design and send another no charge.
Chris M. Spencer is not an associate of the Gillette Company, and the content or viewpoint of this product is not endorsed by the Gillette Company. This is an aftermarket, 3D-printed travel case designed independently to be compatible with vintage Gillette razors.
Engineered to Endure. Built for Lifetime Protection.
Protect your precision grooming investments with premium, heavy-duty safety razor cases and countertop display stands handcrafted in Buffalo, Wyoming. As proven by the truck tire above, our structural enclosures are engineered to withstand extreme stress while keeping your gear pristine.
From individual heirloom razor cases to custom-branded corporate team projects, I design and manufacture specialized gear stands and travel enclosures from scratch. Drawing from over 44 years of experience in antique restoration and wet shaving, Chris M Spencer’s Shave Den builds custom, hygienic 3D-printed travel cases perfectly fitted for vintage classics—including the Fatboy, Slim, Aristocrat, Super Speed, 3 Piece, and Twist-to-Open (TTO) models—as well as modern razors.
Unlike bacteria-trapping vintage cloth or velvet, our dishwasher-safe PETG plastic travel shells, SOTD (Shave Of The Day) stands, razor blade banks, and shaving soap organizers are built to be easily sanitized, ensuring your gear stays immaculate and your counters remain organized for a lifetime of pristine shaves.
BESPOKE & MADE-TO-ORDER CASES
Custom Engineering for Individual Collectors & Corporate Teams
Have a unique razor, a specialized tool, or an upcoming corporate project? Let’s bring it to life. I provide complete, complimentary CAD design services to tailor-make a high-precision case built exactly to your dimensions.
Every single enclosure is independently engineered, programmed, and 3D-printed by me right here in Buffalo, Wyoming. Because you are partnering directly with the craftsman, there are no middleman markups, hidden corporate fees, or design charges—your investment goes 100% toward authentic, American-made utility built to last a lifetime.
Submit an Inquiry
I will personally get back to you within one business day.